nexus6
Junior Member
Posts: 2,526
|
Post by nexus6 on Sept 28, 2021 14:58:39 GMT
In another sign my virginity is growing back, I have recently got right in to model making. We touched on it in a Covid related thread in the other place. Someone had made a Tamiya RC car, and I had got into Gunpla at the start of lockdown. I am now sitting here, supposed to be doing actual work, but instead cutting out tiny little bits of grey plastic and sanding them off to make a 1/35th scale Panzer 1. www.scalemates.com/kits/takom-2145-pzkpfwi-ausfa-and-pzkpfwi-ausfb--1345444It's a great way to realise your eyesight is absolutely crap. It is also a good way to while away the hours getting everything just so. Is anyone else into this? If so show us yer models! |
|
|
|
Post by Aunt Alison on Sept 28, 2021 15:02:23 GMT
Used to love these when I was a kid - usually aircraft. Probably something I'll do when I'm older. Remember having my eye on an aircraft carrier but can't remember if I ever got it. To be honest, I think my dad did most of it
|
|
Fake_Blood
Junior Member
Posts: 1,642
Member is Online
|
Post by Fake_Blood on Sept 28, 2021 15:02:49 GMT
I’d love to make a TNG Enterprise with working lights that doesn’t look shit.
|
|
nexus6
Junior Member
Posts: 2,526
|
Post by nexus6 on Sept 28, 2021 16:16:03 GMT
I have great memories from being a kid and building models. Mainly military, WW2.
Mainly sitting at the dining table, cutting bits off the sprue with scissors and gluing with that utterly rubbish cement that spunked out a little tube.
Nowadays if you don't have 3 different types of sprue cutter, a rotating stand for your various bottles of liquid glue and specialist magnifying goggles you're not doing it right.
Something that amazes me about getting back in to this is just how many sources of information there are. Youtube, forums, manufacturer websites etc.
Glory days.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 28, 2021 16:25:24 GMT
I used to dabble in GunPla in my teens. Have thought of picking up the hobby again lately, but have not purchased any kits yet.
|
|
|
|
Post by tsr999 on Sept 28, 2021 16:45:39 GMT
I mentioned it in the boardgame thread - picked up the Bolt action starter set A box of random sprues and vague instructions to "assembly your squads" was terrifying  And yes, a great way to realise my eyesight has been hosed by age |
|
|
|
Post by One_Vurfed_Gwrx on Sept 28, 2021 16:59:47 GMT
I enjoyed Zoids when I was younger. Pretty much the same build it yourself except the resulting creation drunkenly lurches about via the power of batteries or wind-up. The Marvel comic was cool too, whereas the anime looks pretty dire from a cursory inspection. A fondness for Zoids gave Horizon Zero Dawn bonus aesthetic points for me too.
Not quite the same as the modern equivalents of Airfix though. I do remember seeing some massive Japanese model kit sets in Den Den town in Osaka back in 2008 though...
|
|
|
|
Post by barchetta on Sept 28, 2021 17:29:35 GMT
Last summer I bought an airbrush and a few super small but fantastically detailed Bandai Star Wars kits from Japan (Xwings, TiEs and the Falcon).
Also haven't modelled since, well, building and old Destroid Tomahawk kit back in around 1985. Damn right it proves my eyesight is shot! Looking for a good desk magnifier now.
|
|
|
|
Post by 😎 on Sept 28, 2021 18:00:16 GMT
I buy the bigger Warhammer/Legion/other TT skirmish game models purely because they’re fun to assemble and paint. I probably should get a proper airfix stuff one of these days.
|
|
nexus6
Junior Member
Posts: 2,526
|
Post by nexus6 on Sept 28, 2021 18:14:14 GMT
I buy the bigger Warhammer/Legion/other TT skirmish game models purely because they’re fun to assemble and paint. I probably should get a proper airfix stuff one of these days. I would go for something a bit better than Airfix - might get a bit of a shock at how poor they are. Watched a fair few reviews where the fit and finish just isn’t up to much. Quality models are fun. Filling gaps and shit is not fun. |
|
|
|
Post by elstoof on Sept 28, 2021 18:15:06 GMT
I’ve got a Ducati model that I intend to paint and display as parts rather than build
|
|
nexus6
Junior Member
Posts: 2,526
|
Post by nexus6 on Sept 28, 2021 18:16:18 GMT
Last summer I bought an airbrush and a few super small but fantastically detailed Bandai Star Wars kits from Japan (Xwings, TiEs and the Falcon). Also haven't modelled since, well, building and old Destroid Tomahawk kit back in around 1985. Damn right it proves my eyesight is shot! Looking for a good desk magnifier now. Jealous. Been looking for the Bandai Star Wars stuff but either out of stock or very expensive. Would love some of the figures especially. |
|
|
|
Post by elstoof on Sept 28, 2021 18:16:55 GMT
You could buy these framed parts panels in Japan for a while, seems straightforward enough to do it yourself though  |
|
|
|
Post by freddiemercurystwin on Sept 28, 2021 18:20:24 GMT
I dabbled a bit with probably half a dozen smallish kits (like 1:24 or something I think) back in my dope smoking days (about 20 years ago), tanks and mini's and stuff, great way to while a way some time and listen to the radio or whatever, then I bought a massive Harrier Jump Jet and realised I'd gone too far and lost interest. I'll pick up the hobby again one day for sure, very therapeutic.
|
|
|
|
Post by GigaChad Sigma. on Sept 28, 2021 18:23:58 GMT
Loved making them when I was young.
Mainly WW2 planes. I recall tanks being particularly fiddly and the worst/messiest for glue mishaps.
|
|
nexus6
Junior Member
Posts: 2,526
|
Post by nexus6 on Sept 28, 2021 18:33:55 GMT
Loved making them when I was young. Mainly WW2 planes. I recall tanks being particularly fiddly and the worst/messiest for glue mishaps. Every model type seems to have a down side. Tanks - too many wheels to be sanded smooth but you always end up sanding a flat spot in to them, and the tracks are a bollocks. Planes - cockpit gets all gluey and difficult to paint. Ships - fucking tons of fiddly little bits |
|
|
|
Post by trafford on Sept 28, 2021 18:54:03 GMT
Started on the Airfix, dabbled in Revel and before long I was on the good stuff, Tamiya.
Loved some of their tank kits, a nice line in Japanese WW2 aircraft as well.
I could get back into this, quite fancy a battleship, The Tirpitz maybe?
|
|
LockeTribal
Junior Member
Posts: 1,085
Member is Online
|
Post by LockeTribal on Sept 28, 2021 19:00:11 GMT
I'm quite partial to a bit of gunpla but I'm very much an amateur. I basically just snap fit them and don't have the time to spend cleaning them up properly. Wouldn't know where to start either with sanding or top-coating or that.
Bandai's 30 minute mission kits are great entry level kits that are fully compatible with each other if anyone is thinking of getting into the hobby. Should be available quite cheaply too.
|
|
|
|
Post by Aunt Alison on Sept 28, 2021 19:00:53 GMT
Started on the Airfix, dabbled in Revel and before long I was on the good stuff, Tamiya. Loved some of their tank kits, a nice line in Japanese WW2 aircraft as well. I could get back into this, quite fancy a battleship, The Tirpitz maybe? I was looking at a submarine with a cross-section as well as the aircraft carrier. It looked amazing to my little eyes |
|
nexus6
Junior Member
Posts: 2,526
|
Post by nexus6 on Sept 28, 2021 19:02:33 GMT
I'm quite partial to a bit of gunpla but I'm very much an amateur. I basically just snap fit them and don't have the time to spend cleaning them up properly. Wouldn't know where to start either with sanding or top-coating or that. Bandai's 30 minute mission kits are great entry level kits that are fully compatible with each other if anyone is thinking of getting into the hobby. Should be available quite cheaply too. It was a 30 Minute Mission Alto that got me started on the last day before lockdown! |
|
|
|
Post by barchetta on Sept 28, 2021 19:24:22 GMT
Last summer I bought an airbrush and a few super small but fantastically detailed Bandai Star Wars kits from Japan (Xwings, TiEs and the Falcon). Also haven't modelled since, well, building and old Destroid Tomahawk kit back in around 1985. Damn right it proves my eyesight is shot! Looking for a good desk magnifier now. Jealous. Been looking for the Bandai Star Wars stuff but either out of stock or very expensive. Would love some of the figures especially. The detail for these kits is insane. Falcon fits comfortably in my hand. Feel like I need some more practice on cheaper kits to do these justice. Also found some 3d printed parts to add detail to gunports and cockpits, and lighting kits too. Will make nice dioramas once I have the confidence! |
|
|
|
Post by elstoof on Sept 28, 2021 19:26:55 GMT
I really like the look of those Pocher kits, but they’re priced a fair bit beyond my limit of “stuff I’ll enjoy assembling for a day that will be left to gather dust”
|
|
LockeTribal
Junior Member
Posts: 1,085
Member is Online
|
Post by LockeTribal on Sept 28, 2021 21:59:13 GMT
I'm quite partial to a bit of gunpla but I'm very much an amateur. I basically just snap fit them and don't have the time to spend cleaning them up properly. Wouldn't know where to start either with sanding or top-coating or that. Bandai's 30 minute mission kits are great entry level kits that are fully compatible with each other if anyone is thinking of getting into the hobby. Should be available quite cheaply too. It was a 30 Minute Mission Alto that got me started on the last day before lockdown! It's a lovely little kit and a great one to start with. I started a good few years ago with the RG RX-78-2 and found it massively fiddly, so much so that I didn't buy another kit for years. Had another go with a HG kit from iron blooded orphans and loved it. Probably bought 15 or 20 kits since. |
|
|
|
Post by Red_Bool on Sept 29, 2021 6:21:07 GMT
When I was young I was into building and painting fighter planes (including a *huge* F14 Tomcat  . Many years ago the last thing I built was a Ducati 916. During lockdown last year I built two RG gunpla models and one HG. All three standing proud in front of me on my work-from-home desk. I thoroughly enjoyed building the RG models ("00" Raiser and Force Impulse) but I found the HG model (an RX-78-2, of course) a bit too simple for my taste (it does look awesome finished though). I like the "no paint and glue" approach. Still thinking about getting a MG model. |
|
nexus6
Junior Member
Posts: 2,526
|
Post by nexus6 on Sept 29, 2021 8:22:17 GMT
It was a 30 Minute Mission Alto that got me started on the last day before lockdown! It's a lovely little kit and a great one to start with. I started a good few years ago with the RG RX-78-2 and found it massively fiddly, so much so that I didn't buy another kit for years. Had another go with a HG kit from iron blooded orphans and loved it. Probably bought 15 or 20 kits since. What IBO kit did you get? I was drawn to them immediately for their unique look - kind of more militaristic and 'real' My first purchase after the Alto was the Reborn 100 Graze Custom from IBO. It's a cracker. I have about 10 kits in my stash. Cream of those has to be the RG Barbatos. Will hone my airbrushing skills before attempting that bad boy. |
|
nexus6
Junior Member
Posts: 2,526
|
Post by nexus6 on Sept 29, 2021 13:13:49 GMT
I have spent the last 20 minutes of my lunch break adding detail to the fenders of my little Panzer 1. 2 pry bars and a headlamp. The headlamp was particularly tricky, being as it is fucking tiny and semi-spherical.
I got it off the sprue, tidied it up, test fitted it and then promptly dropped it in the liquid glue bottle as I went to stick it on. ARSE
|
|
LockeTribal
Junior Member
Posts: 1,085
Member is Online
|
Post by LockeTribal on Sept 29, 2021 19:35:56 GMT
It's a lovely little kit and a great one to start with. I started a good few years ago with the RG RX-78-2 and found it massively fiddly, so much so that I didn't buy another kit for years. Had another go with a HG kit from iron blooded orphans and loved it. Probably bought 15 or 20 kits since. What IBO kit did you get? I was drawn to them immediately for their unique look - kind of more militaristic and 'real' My first purchase after the Alto was the Reborn 100 Graze Custom from IBO. It's a cracker. I have about 10 kits in my stash. Cream of those has to be the RG Barbatos. Will hone my airbrushing skills before attempting that bad boy. I went for the HG Barbatos initially and then just picked up whatever kits on sale over on Hobbylink Japan that I liked the look of. I've got a schwalbe graze that I'm looking forward to building at some stage too. Love the design of the Graze. My only issue with the IBO kits is the tiny waists - my Barbatos has gotten very loose over the years. |
|
nexus6
Junior Member
Posts: 2,526
|
Post by nexus6 on Sept 29, 2021 21:49:50 GMT
|
|
|
|
Post by dominalien on Sept 30, 2021 6:10:55 GMT
I used to be all over that. Mostly fighter jets, but also tanks and the odd car. I still have a couple of unopened kits from the 90s.
My favourite company was(is?) always Tamiya, such amazing catalogues.
|
|
nexus6
Junior Member
Posts: 2,526
|
Post by nexus6 on Sept 30, 2021 6:48:16 GMT
I used to be all over that. Mostly fighter jets, but also tanks and the odd car. I still have a couple of unopened kits from the 90s. My favourite company was(is?) always Tamiya, such amazing catalogues. Tamiya catalogues are the business! I have a couple from late 70’s early 80’s. Such dense publications, details dripping off every model, and sublime dioramas on the middle pages. They are still the benchmark company. Others come in with higher part counts to increase detail but often just increases complexity. |
|
. Many years ago the last thing I built was a Ducati 916.